Tư vấn kỹ thuật |
||
Đồng hồ vạn năng dạng bút điện
Analogue Multimeter K1030 - KYORITSU
Long life LED light is of good use in dark place | ![]() | Protection cover prevents unforeseen accident | ||
![]() | ||||
![]() | ||||
Wrapping mechanism for test lead in rear side compartment | ||||
![]() | ||||
![]() | ||||
* Length of test lead is adjustable in 3 steps, ie, 60cm, 40cm and 20cm. |
AC V | 4/40/400/600V (4 Range auto) |±1.3%rdg|±5dgt (4/40V) (50/60Hz) |±1.6%rdg|±5dgt (400/600V) (50/60Hz) |
DC V | 400m/4/40/400/600V (5 Range auto) |±0.8%rdg|±5dgt(400mV~400V) |±1.0%rdg|±5dgt(600V) |
Ω | 400/4k/40k/400k/4M/40MΩ (6 Range auto) |±1.0%rdg|±5dgt (400Ω~4MΩ) |±2.5%rdg|±5dgt (40MΩ) |
Diode check | Test voltage approx. 0.3~1.5V |
Continuity check | Buzzer sounds when resistance is 120Ω or less. |
Capacitance | 50n/500n/5µ/50µ/100µF (5 Range auto) |±3.5%rdg|±10dgt (50nF) |±3.5%rdg|±5dgt (500n~50µF) |±4.5%rdg|±5dgt (100µF) |
Frequency | 5/50/500/5k/50k/200kHz |±0.1%rdg|±5dgt (Measurable input: 1.5Vrms or more) |
Duty | 0.1~99.9% |±2.5%rdg|±5dgt (Pulse width / Pulse cycle) |
Data hold | The measured value can be hold by pressing Data hold button |
Battery voltage warning | When the battery voltage drops to 2.4V|±0.2V or less |
Auto power-off | Built-in |
Applicable standards | IEC 61010-1: 2001 CAT.III 600V IEC 61010-031 IEC 61326-1 |
Power source | Button type battery LR44 (SR44)1.5V × 2 |
Dimensions | 190(L) × 39(W) × 31(D)mm |
Weight | Approx. 100g (including batteries) |
Accessories | Carrying case, LR44 (1.5V) × 2, Instruction manual |