CRT:

Type :

Rectangular with integral graticule.

Display Area :

8 x 10 div ( 1 div = 1 cm )

Accelerating Voltage :

12 kV.

Phosphor :

P31.

VERTICAL AMPLIFIERS ( CH 1 and CH 2 )

Sensitivity :

5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 5 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. 
Vernier control provides fully adjustable 
attenuation between steps.

Accuracy :

± 3 % ( X1 mode ).
± 5 % ( X5 mode ).

Input Resistance:

1 MΩ ± 2 %.

Input Capacitance:

25 pF ± 10 pF.

Frequency Response:

5 mV to 5 V / div ( CAL ):DC to 
60 MHz (-3 dB).1 mV / div (CAL):
DC to 20 MHz (-3 dB)

Rise Time:

Approximately 5.8 ns.

Operaing Modes:

CH1:

CH 1, single trace.

CH2:

CH 2, single trace.

ALT:

dual trace, alternating.

CHOP:

dual trace, chopped.

ADD:

algebraic sum of CH 1 + CH 2.

Polarity Reversal ( Invert ):

CH 2 only.

Maximum Input Voltage:

400 V dc + ac peak.

HORIZONTAL AMPLIFIER ( Input through channel 1 input )

X-Y mode:

switch selectable using X-Y switch.

CH 1:

X axis.

CH 2:

Y axis.

Sensitivity:

1mv/div to 5v/div

Accuracy:

Y-Axis:

 ± 3%.

X-Axis:

± 6%.

Input Impedance:

1MΩ ± 2% 25PF

Frequency Response:

DC to 1 MHz typical ( -3 dB ).

X-Y Phase Difference:

Approximately 3° at 50 kHz.

Maximum Input Voltage:

400V dc+ac pack

SWEEP SYSTEM

Sweep Speed:

0.1 μs/div to 2S/div in 1-2-5 sequence, 23 steps.
Vernier control porvides fully adjustable sweep
time between steps.

Accuracy:

± 3 %.

Sweep Magnification:

10X, ± 10%

Holdoff:

Continuously adjustable from NORM to 5 times normal.

TRIGGERING

Trigger Modes:

AUTO ( free run ) or NORM.

Trigger Source:

CH 1, CH 2, ALT, EXT, LINE.

Maximum External Trigger Voltage:

300 V dc + ac peak

Trigger Coupling:

AC :

30 Hz to 60 MHz

TV-H :

Used for triggering from horizontal sync pulses.

TV-V :

Used for triggering from vertical sync pulses.

Trigger Sensitivity:

Internal:

0.5 division ( 1 division with TV Coupling ).

External:

500 mV.

OTHER SPECIFICATIONS

Calibrating Voltage:

1 kHz ( nominal ) Positive Square Wave,
2.0 V p-p ( ± 3% )

Trace Rotage:

Electrical, front panel adjustable.

Power Requirements:

115/230 VAC ± 10%, 50 / 60 Hz,
approximately 40 W.

Dimensions:

324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" )

Weight:

Approximately 7.8 kg ( 17.2 1bs )

Rated Range of Use:

10° C-35° C, 10-80% R.H.