Type :

Rectangular with integral graticule.

Display Area :

8 x 10 div ( 1 div = 1 cm )

Accelerating Voltage :

14 kV.

Phosphor :

P31.

 VERTICAL AMPLIFIERS ( CH 1 and CH 2 )

Sensitivity :

5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 1 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. 
Vernier control provides fully adjustable 
attenuation between steps.

 Accuracy :

± 3 % ( X1 mode ).
± 5 % ( X5 mode ).

 InputResistance:

1 MΩ ± 2 %

Input Capacitance:

25 pF ± 10 pF.

Frequency Response:

5 mV to 5 V / div ( CAL ):

DC to 25 MHz (-3 dB).

1 mV / div (CAL):

5mV/div~5V/div:  DC~50MHz(-3db)

Rise Time:

Approximately 3.5 ns.

Operaing Modes:

CH1:

CH 1, single trace.

CH2:

CH 2, single trace.

ALT:

Dual trace, alternating.

CHOP:

dual trace, chopped.

ADD:

algebraic sum of CH 1 + CH 2.

Polarity Reversal (Invert):

CH 2 only.

Maximum Input Voltae:

400 V dc + ac peak.

Maximum Undistorted Amplitude:

DC-to-120 MHz:

4 divisions.

DC-to-60 MHz:

8 divisions.

HORIZONTAL AMPLIFIER ( Input through channel 1 input )

X-Y mode:

switch selectable using X-Y switch.

CH 1:

X axis.

CH 2:

Y axis.

Sensitivity:

1mV/DIV - 5V/DIV

Accuracy:

Y-Axis:

± 3%.

X-Axis:

 ± 6%.

Input Impedance:

1MΩ //25PF

Frequency Response:

DC to 1 MHz typical ( -3 dB ).

X-Y Phase Difference:

Approximately 3° at 50 kHz.

Maximum Input Voltage:

400V dc+ac pack

SWEEP SYSTEM

Sweep Speed:

20 ns/div to 0.5 s/div in 1-2-5 sequence, 23
steps.Vernier control porvides fully adjustable
sweep time between steps.

Accuracy:

± 3 %.

Sweep Magnification:

10X, ± 10% extend sweep 
speed up tp 2 ns/div.

Holdoff:

Continuously adjustable from NORM to 5 times normal.

TRIGGERING

Trigger Modes:

AUTO ( free run ) or NORM.

Trigger Source:

CH1, CH2, ALT, EXT, LINE.

Maximum External Trigger Voltage:

300 V dc + ac peak.

Trigger Coupling:

AUTO ( AC ):

30 Hz to 120 MHz.

TV-H ( AC ):

Used for triggering from horizontal sync pulses.

TV-V ( DC ):

Used for triggering from vertical sync pulses.

Trigger Sensitivity:

Internal:

1.0 division.

External:

200 mV.

OTHER SPECIFICATIONS

Calibrating Voltage:

1 kHz ( nominal ) Positive Square Wave, 0.5 V p-p ( ± 3% )

Trace Rotage:

Electrical, front panel adjustable.

Power Requirements:

115/230 VAC ± 10%, 50/60Hz,?
approximately 60 W.

Dimensions:

324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" ).

Weight:

Approximately 8.5 kg ( 18.7 1bs ).

C E STANDARD:

E.M.C. Regulations-1992 )E.C. Directive 
89/336/EEC)EN 50081-1 Emissions.
EN 50082-1 Immunity.